1. Before use, be sure to place the machine on a flat and stable platform or bracket to avoid errors in the measurement value of the laser level. When the laser level is turned on, if the laser of the laser level keeps flashing and an alarm sounds, the placement of the laser level or the bracket should be adjusted.
2. During use, if you want to raise the height of the laser level, you should shake the handle by hand or raise the height of the scaffolding. If the brightness of the laser emitted by the laser level is inconsistent, or the light is dim, you should check the exit position of the laser light in detail. If dirt is found, you should use cotton and alcohol to wipe it.
3. After using the laser level, the power switch of the instrument should be turned off, and the knob switch should be adjusted to the position marked with the letter "OFF" to avoid affecting the measurement accuracy when using the laser level later. In addition, when the laser level is not used for a long time, the battery inside the machine should be removed, and the machine should be properly stored in a soft bag or box, and it should be stored in a dry and ventilated place.
The above is a detailed introduction on how to use the laser level and what to pay attention to when using the laser level. I hope it can help friends in need. Changzhou Laizap Opto-Electro Technology Co., Ltd. is a manufacturer specializing in the production of red and green laser levels. If you want to know more about related knowledge, you can contact us.
